9.5 gal. size maximizes internal volume with minimal external dimensions

• Compact turbine delivers consistent power up to 137 CFM
• Flat HEPA filter design keeps filter out of containment area for greater capacity
• Tool-triggered auto start – suction can start automatically as the tool is switched on
• Sys-Dock allows for storage and transport of Festool Systainers (sold separately)
• Large wheels, low center of gravity greatly limit tipping and improve mobilityContains: SELFCLEAN filter bag, suction hose, hose holder, Sys doc, cable holder, in a cartonThe Festool Mobile Dust Extractor CT 36 deliver maximum capacity vs. external space. It features tool-triggered auto start – the turbine cycles on and off as you operate the sanding tool. You control suction with an easily-turned dial. Large, stable wheels on bottom and the Sys-Dock feature on top allows for easy mobility throughout your shop. Efficient Dust Extraction AnywhereDesigned for maximum internal volume vs. external space, the Festool CLEANTEC Mobile Dust Extractor combines features for operator efficiency, mobility and truly effective dust evacuation from vital work areas. The entire CT 26 unit measures just 24.8″ x 14.4″ x 21.25″ (630 x 365 x 540 mm) and provides 6.9 gallons (26 liters) of dust collection volume; the CT 36 is only 2.25″ higher and accommodates 9.5 gallons (36 liters). Its filter meets US HEPA requirements and is designed to snap quickly into the unit for fast installation and replacement. This filter is flat – unlike a conventional shop vacuum system, it does not extend into the dust containment area. This increases its effectiveness while also maximizing capacity. About HEPA FiltrationFestool CLEANTEC Mobile Dust Extractors meet stringent HEPA requirements. High Efficiency Particulate Air, or HEPA, represents very high standards by which air filtration is measured and the most sophisticated, modern, and high-tech vacuum systems employ filters based on this standard. According to specifications in the United States, a HEPA certified filter must trap at least 99.97% of all particles that are 0.3 microns or larger in diameter. The filter must always retain a high level of airflow as not to reduce suction. Both the filters and the entire CLEANTEC Mobile Dust Extractor units are HEPA certified. Added EfficiencyThe Festool Mobile Dust Extractor CT 36 works with a range of Festool hoses and power cords, which allows for tool-triggered auto start. When the sanding tool is activated, the dust suction starts automatically. The operator does not need to start the dust extractor separately from the sanding tool, saving time and increasing efficiency. A large, easily operated dial on the machine face lets you adjust the suction control – you can maintain the optimal suction up to a full 137 CFM for every tool during every part of a job. Ultimate Mobility in the Shop or at the WorksiteThe dust extractor also features a very stable upright design. Large wheels on the bottom and a balanced center of gravity greatly limit the possibility of tipping, and of damage to the equipment or the shop. At the top, the Festool Mobile Dust Extractor CT 36 features Sys-Dock – a flat base which can be used to firmly attach Festool Systainers and Sortainers . This system allows you to store and transport machines and their related parts and accessories, as well as transport them easily across the shop or the site right along with the dust extractor.The Festool Mobile Dust Extractor CT 36 is supplied with an 11-1/2′ 27 mm anti-static hose and a self-cleaning filter bag. Integrated Hose Garage and Cord Wrap features allow for neat, organized storage of the dust extractor and equipment when not in use.Note: The Festool mobile dust extractor is not approved for use with aluminum dust.